How To Fix Your Washing Machine Drain Problem?

Imagine one day, your washing machine working superbly fine, and suddenly machine’s basin filled with water as it’s not draining properly. Or it's draining but not spinning, moreover, clothes are washed but not cleaned properly. Then what would you do that time? This can occur any moment and smart way to stay away from all of this is, get your Washing Machine Serviced timely.
However, clogs or broken pumps are the main reason for the stopped drain system. As you know drain has a very important role play in your washing machine. It helps remove the water from the washing machine during its spin cycle. Moreover, relying on the washing machine model, the drain pump may be connected directly to the driver motor else your washer may use self-contained electric motor.
There is a number of Washing Machine issues that can cause you a headache. So, it’s good for you if you are well known to all the problems that make your washing machine’s drain system stop. Some of the common problems are simple that you can fix by yourself but few many require professional Washing Machine Repair Service Providers.

Let’s find out How to Fix Common Washing Machine Drain Problems

Before starting fixing, it’s necessary to check your washing machine’s manual. As by reading it out you will find what can be a possible problem, is it big or small problem. The few common issues you will read in the manual include a mechanical failure of the water pump, broken or lose driver belt, clog in the drain system, or the broken lid switch and much more.

Broken Pump Belt 

Some of the washing machine models use a belt-driven pump. So, check the pump belt for the sign of wear or tear and verify that the tension is right for that model.

Check the Standpipe and Hose 

You need to verify the main drain standpipe and hose. Check the complete length of hose for any type of twists or kinks. In case you don’t find any then pull over the hose from a standpipe and remove any obvious bumps of matter and fix it again. If still doesn’t work properly then it’s high time to call professional help.

Inspect Your Washing Machine’s Lid Switch

To check your washing machine’s lid switch, depress it by hand, and if you don’t hear any clicking sound, then it’s time to change it. So, call the technicians for it and get it replaced easily.

It’s a Clogged Drain

If you find there is still remaining water on the floor or in the tub, then it may be the clogged drain. Thus, run the plumber snake inside the drain to clear out the clogged drain. And if it does not work for you then don’t give another try just call the experts as trying hard by yourself can result in high cost.

Conclusion

If these above-mentioned steps are not in your hand then always remember don’t even try just call the JUST CHILLZ SERVICES Professionals. We are a team of expert technicians and can effectively restore your washing machine to good working order.